Wall Repairs & Patching
Cracks, holes, water damage and impact damage repaired and finished seamlessly — invisible after painting.
Wall repairs, plastering, brickwork and cement work across Selangor & KL — smooth finishes that last.
Dorany provides masonry and plastering services for homes, offices and commercial properties across Selangor and Kuala Lumpur. From patching a single crack to building a new brick wall, we deliver a clean, durable finish that's ready for paint or tiles.
Plastering is where cheap work shows. Skipping surface prep, using the wrong mix or rushing the curing process always leads to cracks, hollow patches and peeling paint. We follow the correct method at every stage — so your walls stay smooth for years, not months.
Complete masonry and plastering for repairs and new construction.
Cracks, holes, water damage and impact damage repaired and finished seamlessly — invisible after painting.
Smooth plaster and skim coat finishes for new walls, renovated interiors and damaged surfaces.
New brick or block walls, partition walls, boundary walls and structural masonry built to spec.
External rendering for weather protection and a clean, paintable surface on walls and columns.
Structural and cosmetic cracks stitched, sealed and refinished — with root cause identified and fixed.
Self-levelling and cement screed for uneven floors before tiling, vinyl or timber installation.
Every project is different, but most include these stages:
Final scope confirmed in your itemised quotation after the free site visit.
Interior, exterior and structural work — all handled by our team.
Smooth plaster and skim coat for interior walls and ceilings. Ready for primer and paint.
Weather-resistant cement render for external walls, columns and boundary walls.
Cracks, holes and damaged areas patched to match existing wall finish.
New walls, extensions, partitions and boundary walls built with proper mortar joints.
Cement or self-levelling screed for floors before tiles, vinyl or timber.
Waterproof plaster systems for bathrooms, balconies and areas prone to dampness.
A clear, simple process from enquiry to handover.
We inspect the wall, identify the cause of damage and discuss the right repair or new build method.
You receive an itemised quote explaining materials, method and timeline.
Removing loose plaster, cleaning surfaces, applying bonding agents and mesh.
Applying plaster, skim coat, screed or building new walls with precision and proper curing.
Sanding, quality check, clean-up and warranty on the finished surface.
Six reasons our finishes are smoother and last longer.
Bonding agents, cleaning and mesh where needed — the real reason plaster doesn't crack.
Right mix ratio, correct thickness and proper curing time for maximum strength.
Level surfaces ready for a flawless paint or tile finish — no waviness or hollow spots.
We identify why cracks form — settlement, water, poor substrate — and address it.
Dust barriers, floor protection and daily clean-up on every project.
Clear schedule, regular updates, and completion on the date agreed.
Common questions about plastering costs, timelines and techniques in Malaysia.
Interior plastering or skim coat typically costs RM 3.50–6.00 per sq ft, exterior rendering RM 4.50–8.00 per sq ft, and screeding RM 3.00–5.00 per sq ft. Wall repairs are quoted per item. We provide a detailed itemised quote after a free site visit.
Fresh plaster needs 3–7 days to dry before painting, depending on thickness and weather. Screed takes 7–28 days to fully cure before laying tiles or vinyl. We confirm exact drying windows in your quotation.
Yes. We repair both cosmetic and structural cracks. Cosmetic cracks are patched and skim-coated. Structural cracks may need stitching, mesh reinforcement and sometimes underlying cause repair (settlement, water ingress) — we advise after inspection.
Yes. We build partition walls, boundary walls, extensions and general masonry with bricks, blocks or lightweight panels as appropriate.
Yes, if the old plaster is sound. We apply a bonding agent first, then skim coat. If the old plaster is loose or hollow, we remove and replaster — otherwise the new coat will fail.
Yes, but only after the source of water is fixed. We identify the leak, repair it, remove damaged material, treat for mould, then replaster with waterproof render where appropriate.
Yes. Painting is a separate service but we can bundle it — many clients prefer us to plaster, sand, prime and paint in one continuous project for a better finish.
We cover Selangor, Kuala Lumpur, Putrajaya and nearby areas including Petaling Jaya, Shah Alam, Subang Jaya, Klang, Puchong, Cheras and Ampang.
Get a free site inspection and a detailed, no-obligation quotation.